Kioti DK4810 Manual page 126

Hide thumbs Also See for DK4810:
Table of Contents

Advertisement

5

dk4810(H,HS) / dk5310(H,HS) / dk5810(H,HS)
-
CONNECTING AND DISCONNECTING ImPlEmENT
CONNECTION
1. Make sure to stop the engine be-
fore connecting it.
2. Move the double acting valve le-
ver forward and backward for 4
to 5 times to release the pressure
in the hydraulic line of the tractor.
otherwise, it is hard to connect the
couplers, and hydraulic fluid can be
sprayed from the line and get in to
your eyes while connecting them.
3. R e m o v e a n y f o r e i g n m a t e r i a l
around the male and female cou-
plers. If foreign material enters the
hydraulic components, it can lead
to malfunction of the system.
4. open the dust-proof cover of the
female coupler of the tractor and
insert the male coupler of the im-
plement. A clicking sound is heard
when the couplers are engaged.
5. pull the hydraulic hose of the im-
plement to check that the couplers
are properly connected.
6. Start the engine and check the op-
erating status and leakage.
TD210-호주향-DK4810,5310,5810(HS)-028 28
DISCONNECTION
1. Make sure to stop the engine be-
fore disconnecting it.
2. Release any residual pressure in the
hydraulic hoses of the implement
and tractor by operating the double
acting valve lever 4 to 5 times.
3. R e m o v e a n y f o r e i g n m a t e r i a l
around the couplers.
4. lower the implement on the ground
or remove any external load applied
to the implement. disconnecting
hoses while outer load is applied to
the implement is very difficult and
dangerous due to the pressurized
fluid in the hose.
5. Remove the male coupler by push-
ing the female coupler boss back-
ward.
6. close the dust-proof cover of the
female coupler. Wrap the male cou-
pler of the implement with a plastic
bag to prevent contamination.
WARNING
Never connect or disconnect
the implement hydraulic hoses
while the pressure in it is not re-
leased or the engine is running.
It is hard to connect and discon-
nect the hose and hydraulic
fluid can be sprayed from the
hose, and get into your eyes or
skin.
S t o p t h e e n g i n e a n d w e a r
protective glasses and gloves
before work.
2018-09-07 오전 10:36:42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents