Maintenance; Optional Accessories - Makita DVC750L Instruction Manual

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
CAUTION:
To reduce the contact to the dust,
use goggles and dust mask when emptying the
tank or cleaning the lter.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
T o maintain pro d u c t S A F E T Y an d R E L I A B I L I T Y ,
repairs, any other maintenance or adjustment should
be per f orme d b y Makita A ut h ori z e d or F a c tor y S er v i c e
C enters, al w a y s using Makita repla c ement parts.
Emptying the tank
WARNING:
Always make sure that the
cleaner is switched off and the battery cartridge
is removed before emptying the tank. F ailure to d o
so ma y c ause an ele c tri c s h o c k an d serious personal
injury.
CAUTION:
Do not apply a great impact on
the tank. A great impa c t ma y c ause d e f ormation an d
d amage to t h e parts.
CAUTION:
Empty the tank at least once a day
although this depends on picked-up dust volume
in the tank. O r, t h e su c tion f or c e w ill w eaken an d t h e
motor ma y be broken.
CAUTION:
Do not grab the hook when empty-
ing the tank. G rabbing t h e h ook ma y c ause t h e h ook
to break.
U n h ook an d li f t up t h e tank c o v er.
Shake off the dust from the HEPA filter and then dis-
pose o f t h e d ust f rom t h e tank.
► Fig.16: 1. H ook 2. T ank
Cleaning of HEPA lter
NOTICE:
Do not rub or scratch the HEPA lter
with hard objects such as a brush and a paddle.
Clogged HEPA filter cause poor suction performance.
Clean out the filter from time to time.
1.
To remove the HEPA filter, unlock and remove the
tank c o v er.
2. Turn the HEPA filter counterclockwise and pull out
o f t h e tank c o v er.
► Fig.17: 1. T ank c o v er 2. HEPA filter 3. T ank
3. To remove dust adhering to the HEPA filter, shake
t h e f rame bottom q ui c kl y se v eral times.
Occasionally wash the HEPA filter in water, rinse and
d r y t h oroug h l y in t h e s h a d e be f ore use. Ne v er w as h t h e
filter in a washing machine.
► Fig.18
4. To install the HEPA filter, place and twist it clock-
wise so that the securing lips are firmly locked in the
tank c o v er.
► Fig.19: 1. T ank c o v er 2. HEPA filter 3. S e c uring lip
4. T ank
5.
Mount t h e tank c o v er an d lo c k it.
NOTE: The filter wear out in course of time. It is rec-
ommen d e d to h a v e some spares f or t h em.
Installing pre lter set
Optional accessory
1. U nlo c k an d remo v e t h e tank c o v er.
2. Set the damper on the HEPA filter and cover it
with the prefilter. Be sure to hook the rubber band of the
prefilter onto the lip of the HEPA filter.
► Fig.20: 1. HEPA filter 2. D amper 3. Prefilter
3. Mount t h e tank c o v er an d lo c k it.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
speci ed in this manual. T h e use o f an y ot h er
a c c essories or atta c h ments mig h t present a risk o f
injury to persons. Only use accessory or attachment
f or its state d purpose.
I f y ou nee d an y assistan c e f or more d etails regar d -
ing t h ese a c c essories, ask y our lo c al Makita S er v i c e
C enter.
• H ose
• F ront c u f f 2 4
• Joint 22-3 8
• C orner no z z le
• R oun d brus h
• S h oul d er strap
• Prefilter set
• Makita genuine batter y an d c h arger
NOTE: S ome items in t h e list ma y be in c lu d e d in t h e
tool pa c kage as stan d ar d a c c essories. T h e y ma y
d i f f er f rom c ountr y to c ountr y .
12 ENGLISH