Superimposing A Title; Superposición De Títulos - Sony Handycam Vision DCR-SC100 Operating Instructions Manual

Digital camcorders: digital video camera recorder
Hide thumbs Also See for Handycam Vision DCR-SC100:
Table of Contents

Advertisement

Superimposing a title

If you use a tape with cassette memory, you can
superimpose the titles while recording or after
recording. When you playback the tape, the title
is displayed for 5 seconds from the point where
you superimposed it.
You can select from eight preset titles and one
original (CUSTOM TITLE) to superimpose over
the picture.
Superimposing titles
(1)Press TITLE to display the titles on the LCD
screen.
(2)Turn the CONTROL dial to select the title,
then press the CONTROL dial.
(3)Turn the CONTROL dial to select the color,
size, or position, then press the CONTROL
dial.
(4)Turn the CONTROL dial to select the desired
item, then press the CONTROL dial.
(5)Repeat steps 3 and 4 until the title is arranged
as desired.
(6)Press CONTROL dial again to complete the
setting.
1
TITLE
While you are playing back, pausing,
or recording
After step 6, the "SAVE" indicator appears on the
screen for 5 seconds and the title is set.
While in Standby mode
After step 6, the "TITLE" indicator appears. And
when you press START/STOP to start recording,
"SAVE" appears on the screen for 5 seconds and
the title is set.
66
TITLER MODE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
[
]
TITLE : END
Superposición de
títulos
Si utiliza una cinta con memoria en cassette,
podrá superponer los títulos durante o después
de la grabación. Al reproducir la cinta, el título
aparece durante 5 segundos a partir del punto
donde lo haya superpuesto.
Es posible realizar la selección entre ocho títulos
predefinidos y uno original (CUSTOM TITLE)
para superponerlo en la imagen.
Superposición de títulos
(1)Presione TITLE para que los títulos aparezcan
en la pantalla LCD.
(2)Gire el dial CONTROL para seleccionar el
título y, a continuación, presiónelo.
(3)Gire el dial CONTROL para seleccionar el
color, el tamaño o la posición y, a
continuación, presiónelo.
(4)Gire el dial CONTROL para seleccionar el
elemento que desee y, a continuación, púlselo.
(5)Repita los pasos 3 y 4 hasta que el título
quede definido como desee.
(6)Vuelva a presionar el dial CONTROL para
completar el ajuste.
2~6
Durante el modo de reproducción,
pausa o grabación
Después del paso 6, el indicador "SAVE" aparece
en pantalla durante 5 segundos y el título queda
ajustado.
Durante el modo de espera
Después del paso 6, aparece el indicador
"TITLE", y al pulsar START/STOP para iniciar la
grabación, aparece "SAVE" en pantalla durante 5
segundos y el título queda ajustado.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents