Table of Contents
Advertisement
Quick Links
Solar Inverter
REACT2-BATT
Quick Installation Guide
In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and
followed. The technical documentation for the product is available at the website.
The device must be used in the manner described in the manual. If this is not the case the safety devices guaranteed by the inverter might be ineffective.
Advertisement
Table of Contents
Related Manuals for Fimer REACT2-BATT
Summary of Contents for Fimer REACT2-BATT
- Page 1 Solar Inverter REACT2-BATT Quick Installation Guide In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and followed. The technical documentation for the product is available at the website.
-
Page 2: Labels And Symbols
The labels on the inverter show the markings, main technical data and the The model of equipment to which this guide refers is REACT2-BATT. l rights reserved. Reproduction, use or disclosure to third parties without express written authority is strictly forbidden. -
Page 3: List Of Supplied Components
• Do not use or leave exposed to direct sunlight (or in a vehicle which is exposed to the sun). The REACT2-BATT could produce heat, smoke, breakages or flames. In addition, its performance might deteriorate and/ or it might have a shorter lifespan. -
Page 4: Lifting And Transport
REACT2-BATT shall be put into service within 6 with care. They should be removed by suitable means and not left in the months at most of the date of delivery by FIMER to the recipient of the goods. hands of individuals who are not responsible (e.g. children). -
Page 5: Choice Of Installation Location
• The ambient temperature of the installation location should be between 5°C and 30°C to guarantee the optimal operation of the battery unit (REACT2-BATT). Here below are the functions available from the system on the basis of the ambient temperature:... -
Page 6: Assembly Instruction
7. Assembly Instruction • Hang up the lower part of the REACT2-BATT to the wall using the two wall attachment point (26)(holes diameter 11 mm). ATTENTION – To avoid risks of electrical shock, all installation and wiring operations must be carried out with the DC disconnect switch... - Page 7 (20). LIFTING – Risk of injury due to the heavy weight of the equipment. • Hang up the lower part of the REACT2-BATT to the wall using the two wall attachment point (26) (holes diameter 11 mm). 9 mm...
-
Page 8: Characteristics And Technical Data
With regard to purchase orders, the agreed particulars reproduction, disclosure to third parties or utilization of representative or visit: shall prevail. FIMER does not accept any responsibility its contents – in whole or in parts – is forbidden without whatsoever for potential errors or possible lack of prior written consent of FIMER.
Need help?
Do you have a question about the REACT2-BATT and is the answer not in the manual?
Questions and answers