Advertisement
OPERATING INSTRUCTIONS
The fixture should be securely fastened to a solid bench of sufficient strength to withstand the weight of the
fixture. Push either the round or the square reaction post into the centre position of required hole. Read the
maximum torque allowable for each position. Use only the fixture that is designed to match the maximum
torque of the Hydraulic wrench. Only use one reaction post at a time. Never use with a larger capacity wrench
than the fixture is designed to operate at, as stated on the reaction plate. Keep all body parts away from
reaction posts when operating. Keep the hydraulic wrench as close to the reaction plate as possible.
Once the hydraulic wrench is set in the fixture, operate the wrench to the required torque and take the reading
from the display device.
IMPORTANT:
ALWAYS REACT AS CLOSE TO BASE AS POSSIBLE. DON'T REACT AT TIP OF
REACTION POST.
WARNING:
WARNING:
SPECIFICATIONS
Part
Number
80026*
H 202 mm x L 330 mm x W 190 mm
80022*
H 259 mm x L 450 mm x W 250 mm
80023*
H 362 mm x L 620 mm x W 340 mm
80031
H 252 mm x L 415 mm x W 190 mm
80029
H 278 mm x L 450 mm x W 250 mm
80032
H 362 mm x L 620 mm x W 340 mm
*
- currently obsolete part numbers
MAINTENANCE
Keep the tool in a clean condition to aid safety. Do not use abrasives or solvent based cleaners.
4
KEEP HANDS CLEAR OF THE REACTION BAR.
REFER TO OPERATORS MANUAL FOR THE USE OF HYDRAULIC TOOL.
Dimensions
Assembly Torque Settings
M10 Bolt = 72 N·m
M12 Bolt = 122 N·m
M16 Bolts = 325 N·m
Shoulder screw M8 = 27 N·m
Shoulder screw M10 = 56 N·m
Shoulder screw M12 = 96 N·m
Weight
Maximum
(Excluding
Torque
Transducer)
19.0 Kg
7,000 N∙m
50.0 Kg
50,000 N∙m
105.0 Kg
80,000 N∙m
21.5 Kg
7,000 N∙m
52.0 Kg
50,000 N∙m
109.5 Kg
80,000 N∙m
Advertisement
