TEMPERATURE MONITORING DEVICE COMEM DTI AND COMEM EDTI - INSTRUCTION MANUAL
16
—
6. Programming of the device
6.9 Selection of the linked channel with the
THIS SETTING IS SIGNIFICANT ONLY FOR
COMEM EDTI MODEL.
This setting is indicated on displays with:
• AN on T1-T2 display
• the linked measure channel on T3-T4 display: CH 1/2/3/4 for the
1/2/3/4 measure channel, ALL to link the measure channel with
the higher temperature.
With ⇐ and ⇒ keys to select the options.
Confirm with ENTER.
Link channel setting
Channel with higher temperature
Measure channel CH 1
Measure channel CH 2
Measure channel CH 3
Measure channel CH 4
analogue output
NOTE
T1-T2 display
AN
AN
AN
AN
AN
T3-T4 display
ALL
Ch 1
Ch 2
Ch 3
Ch 4