Safety; Safety Instructions - ABB Comem DTI Instruction Manual

TRANSFORMER COMPONENTS
—

1. Safety

1.1 Safety instructions

Make sure that any persons installing, taking into operation and
operating the "temperature monitoring device Comem DTI/eDTI":
• Are technically qualified and competent.
• Fully comply with these assembling instructions.
Improper operations or misuse could cause danger to:
• life and limb.
• to the equipment and other assets of the operator.
• to the equipment proper function.
Opening of the device will void your warranty.
Safety instructions in this manual are shown in three different
forms to emphasize important information.
THIS INFORMATION INDICATES PARTICU-
LAR DANGER TO LIFE AND HEALTH. DISRE-
GARDING SUCH A WARNING CAN LEAD TO
SERIOUS OR FATAL INJURY.
THESE NOTES GIVE IMPORTANT OR
SPECIFIC INFORMATION CONCERNING THE
EQUIPMENT OR AS TO WORK WITH THE
EQUIPMENT.
ALL RELEVANT FIRE PROTECTION REGULA-
TION MUST BE STRICTLY OBSERVED.
WARNING
NOTE
WARNING
CAUTION
THIS INFORMATION INDICATES PARTICU-
LAR DANGER TO EQUIPMENT OR OTHER
PROPERTY OF THE USER. SERIOUS OR FA-
TAL INJURY CANNOT BE EXCLUDED.
CAUTION
INSTALLATION, ELECTRICAL CONNECTION
AND FITTING THE DEVICE MAY ONLY BE
CARRIED OUT BY QUALIFIED PERSONNEL
AND ONLY IN ACCORDANCE TO THIS IN-
STRUCTION MANUAL.
IT IS RESPONSIBILITY OF THE USER TO
MAKE SURE THAT THE DEVICE IS USED FOR
SPECIFIED APPLICATION ONLY.
FOR SAFETY MATTERS, PLEASE AVOID ANY
UNAUTHORIZED AND IMPROPERLY WORKS.
CAUTION
THE TEMPERATURE CONTROL UNIT
COMEM DTI/EDTI MUST NOT BE INSTALLED
NEAR SOURCES OF ELECTROMAGNETIC
INTERFERENCE.
3