TEMPERATURE MONITORING DEVICE COMEM DTI AND COMEM EDTI - INSTRUCTION MANUAL
10
—
5. Front panel description
Legend:
1. LEDs T1-T2-T3-T4 for the on-measuring channel displayed
2. T1-T2 and T3-T4 displays for the channel temperature
3. LEDs ALARM for the Alarm status in the related channels
4. LEDs TRIP for the Trip status in the related channels (1 to 4)
5. LED FAULT: failure indication (device or PT100 probes)
6. LED HOLD: the manual reset is active
7. LED FAN: the ventilation output is active
8. Push - button HOT / T. MAX to display the measured channel
9. Push - button ENTER / RESET to confirm programming set
10. Push - buttons ⇒+ / ⇐- for selecting the displayed channel
11. Push - button SET for the settings
1
2
3
4
8
9
visualization and settings
(1 to 4)
with higher temperature (LED indication activated) and to
display maximum temperatures achieved
and the manual alarm reset intervention
and for changing parameter of programming
10
5
6
7
11
10