Working Instructions - Fein Slugger JME Holemaker III Instruction Manual

OBJ_BUCH-0000000281-001.book Page 17 Tuesday, July 4, 2017 11:42 AM

Working instructions.

When there is danger of falling down, secure the machine using the provided
WARNING
safety strap; especially when working aloft, on vertical building elements or
overhead. In case of a power failure or when the mains plug is pulled, the magnetic holding
power is not maintained.
Always carry the power tool by its han-
dle, not by the drill-motor cable.
Fastening the safety strap (figure 8).
Fasten the machine securely around the
workpiece using the provided safety strap.
Fig. 7
Fig. 8
Clamping strap
en
17