Column Csp38I Assembling - Scale House FPW Series Installation And Operating Manual

3. COLUMN CSP38I ASSEMBLING (PIC.1)
1. fasten the column (2) to the base (7) using the 2 included screws (10 and 3).
2. screw the pins' nuts.
3. screw 4 pins (8) to the base (7).
4. get the connection cable, proceeding from the scale, across the column (2), and take it out of the opening.
5. realize the connection following the instructions of the indicator's handbook.
6. fasten the column (2) to the support for the indicator (9 and 5) using the 2 included screws (11 and 5).
7. fasten the weight indicator (6) to the support (9) using 2 screws (4) and keeping the scale connection cable
well stretched.
8. adjusting the pins, position the CSP column perpendicular to the floor.
9. tighten the pins' nuts.
Pic.1
8