Important Warnings - Scale House FPW Series Installation And Operating Manual

IMPORTANT WARNINGS

Place the platform in a room in which the following conditions are respected:
- level supporting surface,
- stability and absence of vibrations,
- absence of aggressive powders or vapours,
- absence of airstreams,
- moderate temperature and humidity (don't expose directly to sunlight or heat sources),
- floor hardness 100kg/cm at least.
2
Make sure the platform is level through the leads and the spirit level included in the homologated version
(see the UNBLOCK and INSTALLATION instructions).
Do not weld, pierce or modify the structure without consulting the seller. Eventual damages or tampering annul
the warranty conditions.
If the working environment is a damp and wet place, the installation must be carried out in such a way as to
avoid water and/or rubble accumulation and stagnation under the structure.
The platform must be connected to a weight indicator through the included cable, following the indicator's
instructions.
Do not trample on, squash or expose to heat source the screened connection cable.
CONNECT THROUGH EARTH TERMINAL the platform's metallic structure through the appropriate power
outlet, especially when weighing material whose manipulation could provoke electrostatic discharges (powders,
plastic materials, etc.).
In case of doubt, consult the seller.
DO NOT INSTALL IN A PLACE AT EXPLOSION RISK.
(Unless it is specifically determined)
Do not use solvents for cleaning.
4