Advertisement
Step 10: FXS Call Routing
To route the calls from FXS port, you need to configure the following:
•
Routing type for time zone
•
Routing group for time zone
•
Timetable
Follow the steps given below to program FXS Call Routing:
•
Open Jeeves of SIMADO GFX44. (Refer 'Programming SIMADO GFX44)
•
Open 'Main Menu' page and login into the Jeeves. Click on 'FXS
Configuration' button and program the following parameters:
•
By default, Timetable 1 is assigned to all FXS Ports. Assign the desired
timetable to the FXS Port.
•
By default, Routing Type 'Answer-Fixed' is assigned to all FXS Ports for
all time zones. Assign the desired routing type to the FXS Ports for all
the time zones.
•
By default, Routing Group '4' is assigned to all FXS Ports for all time
zones. Assign the desired routing group to the FXS Ports for all the time
zones.
•
Click the 'Upload Changes' button to upload the changes in SIMADO
GFX44.
Advertisement
Need help?
Do you have a question about the SIMADO GFX44 and is the answer not in the manual?