Matrix Telecom SIMADO GFX44 Quick Start Manual page 10

Programming SIMADO GFX44
Programming of SIMADO GFX44 can be done in the following ways:
• Using Serial Jeeves
• By issuing commands from FXS Port
• By issuing commands through Mobile Port
Programming SIMADO GFX44 using Serial Jeeves:
SIMADO GFX44 enables you to program the system through windows based
software, known as Jeeves. Jeeves is a flexible and friendly tool with mouse
operated GUI. To program the system using Jeeves, follow the steps given
below:
• Insert 'Matrix SIMADO GFX44' CD provided to you along with the product
in the CD Drive of your computer. It is an auto-run CD.
• CD drive window will open. It contains two folders viz. 'Documents' and
'SIMADO GFX44 Jeeves VxRy'. (If CD does not open by itself, click on 'My
Computer'  'CD Drive' to exaplore the CD.
• Open 'SIMADO GFX44 Jeeves VxRy' folder. Run set-up to install the Jeeves
into your computer.
• Connect your computer with the system using COM Port.
• Click on Start  Programs  Matrix  SIMADO GFX44 Jeeves VxRy.
SIMADO GFX44 Serial Jeeves Home page will open .