Software Version; Showroom Programme (Demo Mode); Factory Default Settings - Miele CM 6160 Operating Instructions Manual

Settings
The update can take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the coffee machine
while an update is being downloaded
or installed. Otherwise, the update
will be aborted and will not be
downloaded or installed.
- Some software updates can only be
carried out by a Miele service
technician.

Software version

The "Software version" menu option is
intended for Miele service technicians.
You do not require this information for
your own use.
Showroom programme (Demo
mode)
Do not activate this setting for
domestic use.
The
Showroom programme
function enables the coffee machine to
be demonstrated in stores or
showrooms. In this mode, the machine
lights up but drinks cannot be prepared
and no maintenance programmes can
be carried out.
50
|
Demo mode
You can activate demo mode without
commissioning the appliance for the
first time. The water container is
empty or not inserted. Switch the
coffee machine on. As soon as the
and replace the water container
appears, touch the  sensor for
5 seconds. Demo mode is active.

Factory default settings

You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings.
The following will not be reset:
- The number of drinks dispensed
and the appliance status (No. of
portions until appliance needs
descaling, ... brew unit needs
degreasing)
- Language
- Profiles and respective drinks
- Miele@home
Fill
message