Table of Contents
Advertisement
Settings
Activating / deactivating
The RemoteUpdate function is
activated by default. Available updates
will be downloaded automatically but
will only be installed if you initiate
installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear in your coffee
machine display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
coffee machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the coffee machine off
during the update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by Miele Service.
60
Software version
The "Software version" menu option is
intended for Miele Service. You do not
need this information for domestic use.
Legal information
This menu option contains details of the
open source licences used.
Showroom program (demo
mode)
Do not activate this function for
domestic use.
The
Showroom Program
function enables the coffee machine to
be demonstrated in stores or
showrooms. In this mode, the machine
lights up but no drinks can be prepared
and no maintenance programs can be
run.
You can activate demo mode without
commissioning the appliance for the
first time. Switch the coffee machine
on and off again. Press the /
Remote button for 5 seconds straight
away. Demo mode is activated.
Factory default settings
You can reset the coffee machine to its
factory default settings.
MyMiele can be reset separately.
|
Demo Mode
Advertisement
Table of Contents
