Miele CM 6160 Operating Instructions Manual page 74

Problem solving guide
Problem
Neither milk nor milk
froth comes out of the
central spout.
Empty the drip tray and the
waste container appears
in the display, even
though the drip tray has
been emptied.
Insert the drip tray and the
waste container appears
in the display even
though both are fitted.
74
Possible cause and remedy
The milk tube was connected incorrectly to the
central spout.
The seam on the milk tube, on the central spout and
on the rinsing valve facilitates assembly.
 Ensure that the milk tube is connected correctly to
the central spout.
The milk pipework is blocked.
 Clean the central spout and milk pipework
carefully with the brush.
This is not a fault. The drip tray was not removed
completely and/or was refitted too quickly.
The drip tray is not in the correct position and is
therefore not detected.
 Empty the drip tray and the waste container.
Reassemble all parts and push the drip tray back
as far as it will go in the coffee machine.