Miele CM 6160 Operating Instructions Manual page 70

Problem solving guide
Problem
F73 or
Check the brew unit
70
Possible cause and remedy
The brew unit cannot be positioned correctly.
 Switch the coffee machine off with the On/Off 
sensor.
 Switch off at the wall socket and remove the plug.
Wait for two minutes before inserting the plug
back in the socket and switching back on.
 Remove the brew unit and rinse under warm
running water.
 Push the coffee ejector of the brew unit into the
correct position (see diagram).
 Do not fit the brew unit. Close the appliance door
and switch the coffee machine on with the On/
Off  sensor.
This will initialise the brew unit motor and put it back
into the start position.
 When
Insert the brew unit
open the appliance door and put the brew unit
back in the machine. Close the appliance door.
appears in the display,