Language Selection; Configuration - OHAUS 7000 Series Service Manual

GETTING STARTED
CHAPTER 1
Navigation Keys
The navigation keys are used for changing focus between on-screen items, for confirming a
selection, and to initiate a demand output.
ARROW
KEYS
PRINT/ENTER Press the PRINT/ENTER key in the Navigation

1.8.5 Language Selection

Depending on the terminal's language setup (at Terminal > Region > Language), parameter
labels in the operator menu will appear as words.

1.8.6 Configuration

An overview of the setup menu structure is provided in. This shows all setup pages in the
terminal's configuration, except branches that application specific.
Details for each of the five major branches in setup are provided in the sections following the
overview. Use this information to program the T72XW for the required application.
Graphic elements in the structure are shown
as follows:
Ohaus Corporation www.ohaus.com
Table 1-8: Navigation Keys
Move focus, or the cursor, in the direction indicated.
When the display is in the menu mode, and the left-
most item is selected, the LEFT arrow will return to
the previous screen.
Keypad to accept the item or selection in focus and
move to the next display.
1-16 7000 Series T72XW Indicator Service Manual