TROUBLE SHOOTING GUIDE
If you experience difficulties with the appliance, please check the suggestions below before contacting
customer services:
Problem
The unit will not switch on
Runs for a short while and then
switches off
The unit has been running for a long
period and then switches off
Runs without cooling in EVA/COOLER
mode and Empty Tank Indicator
blinking
Water is leaking from unit when
moving
The honeycomb filter is blocked
with dust.
The air inlet is blocked with dust
10
Solution
• Check Trip Switch / Fuse
• Check if the plug is connected to mains socket correctly
• Check batteries in the remote control
• Check if air outlet is blocked, if so remove obstacle
• Check if Timer function has been activated
• The overheat protection has been activated to protect the
motor – turn unit off for a least 10 minutes and then switch
back on
• The water tank is empty and needs to be re-filled
• Check if the air filter is dirty – if so, clean
• Check if air outlets or inlets are blocked
• Drain the water tank – refer to Cleaning and Maintenance
on Page 7
• Ensure rubber drainage plug is securely fitted in water tank
Ensure unit is located on a flat and even surface
• Pull down the honeycomb filter and clean it.
• Remove the foreign matter