Table of Contents
Advertisement
MAINS PLUG FUSE REPLACEMENT
Fuse Replacement (Class II)
Remove the fuse cover with a small flat head screw driver.
Take out the fuse and replace with a new fuse of the same
Amp. Replace the fuse cover and push back into place.
TROUBLE SHOOTING GUIDE
If you experience difficulties with the appliance, please check the suggestions below before contacting
customer services:
Problem
The unit will not switch on
Runs for a short while and then
switches off
The unit has been running for a long
period and then switches off
Runs without cooling in Cool/Hum.
mode and Empty Tank Indicator
blinking
Water is leaking from unit when
moving
The honeycomb filter is blocked
with dust.
The air inlet is blocked with dust
8
Solution
• Check Trip Switch / Fuse
• Check if the plug is connected to mains socket correctly
• Check batteries in the remote control
• Check if air outlet is blocked, if so remove obstacle
• Check if Timer function has been activated
• The overheat protection has been activated to protect the
motor – turn unit off for a least 10 minutes and then switch
back on
• The water tank is empty and needs to be re-filled
• Check if the air filter is dirty – if so, clean
• Check if air outlets or inlets are blocked
• Drain the water tank – refer to Cleaning and Maintenance
on Page 7
• Ensure rubber drainage plug is securely fitted in water tank
Ensure unit is located on a flat and even surface
• Pull down the honeycomb filter and clean it.
• Remove the foreign matter
Fuse Cover
Hide quick links:
Advertisement
Table of Contents
