Overview; Features; Important Notes - ASL INTERCOM WMC01 User Manual

Overview

1
1.1

Features

The WMC01 Wall Mount Controller provides control of audio source selection and broadcast level within a VIPEDIA-12
system.
The WMC01 is typically installed in restaurants, meeting rooms and hotel lobbies to allow users to select from a list of
different music channels and to adjust the volume.
Connections to the VIPEDIA-12 can be made over either Ethernet or serial RS485/analogue audio. Power is sourced from
a PoE supply in Ethernet mode or a 24 V DC supply in serial mode.
A standard 3.5 mm socket allows an audio device such as phone or music player to be connected locally.
The WMC01 includes a flush back box for simple installation and is available in either black, white or gold finishes.
1.2

Important Notes

The WMC requires MPS firmware V3.0.3.0-P and VIPEDIA firmware V3.0.3.0 or above.
The WMC selects the audio source for a predefined fixed list of outputs chosen by the system administrator. It is not
possible for the end-user to route audio sources selectively to outputs, but only for them to choose which audio source is
routed to the predefined list.
In systems with multiple WMC01 units, each device must control a unique set of audio outputs. It is not possible to control
the audio routed to any single or group of outputs from more than one device.
WMC01 – User's Manual
U-0664-0833-WMC_User_Manual.docx – Issue: 02 complete, approved
Page 5 of 20