II. General description
2.1 Visualization screen
Cut-off graduations for
visual control
2.2 User interface
The battery light indicates, when blinking, that the battery level is low.
On CAP2500, when the rechargeable batteries are in charge, the light remains on.
On CAP2300, when the non-rechargeable battery is low, please replace it.
The key « On/Off » enables to switch on the tester. To switch it off, press the key
3 seconds.
The key «Print-out» enables to print out or to send measurements.
The key «Ok» enables to validate.
The key «ESC» enables to get out of a menu.
30/06/16
LCD screen
The arrows « up » and « down » enable to move in the menus.
Visualization screen
3
Rev A