Optical Head Positioning In Front Of The Headlamp - Capelec CAP2500 User Manual

3.4 Optical head positioning in front of the headlamp.

Electronic positioning assistance (only available on CAP2500) allows you to be guided when
positioning the optical head in front of the headlamp. It activates itself before each cut-off
measurement for dipped headlamps. Indications displayed on the screen tell you in what
direction to move the head. When the optimal positioning is reached, « Ok » is displayed on the
screen, and the testers goes automatically to the next step.
Operating mode for CAP2500:
1- Move the headlight tester in front of the headlamp to be controlled, by visually positioning it
below the headlamp centre.
2- Follow the indications on the screen, so that to move up the optical head at the right height.
3- At last, position accurately the optical head by taking into account the indications until you get
« Ok » on the screen.
30/06/16
Up
Down
Forward
Backwards
9
Rev A