Saxby Lighting Reeve 2 Instruction Leaflet

Batten

Table of Contents

Download this manual

Commissioning

• Attach product to mounting brackets by pushing until

securely held.

• The LED module in this product is non replaceable.

We recommend cleaning with a soft dry cloth.

Do not use solvents or abrasive cleaners as these could damage the finish.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or retailer for recycling advice.

For your safety, always switch off the mains supply before changing lightbulbs, or cleaning.

The LED module is protected by a shade. The shade cannot be replaced, if the shade becomes

cracked or damaged, this light fitting must be discarded

www.saxbylighting.com

• Replace fuse or circuit breaker and switch on. Your

light is now ready for use.

Iss.2 06072017

Saxby Lighting Ltd. BH23 3PE

Instruction leaflet

Reeve 2 Batten

73535, 73536

Table of Contents

Do you have a question about the Reeve 2 and is the answer not in the manual?

Page 1 For your safety, always switch off the mains supply before changing lightbulbs, or cleaning. The LED module is protected by a shade. The shade cannot be replaced, if the shade becomes cracked or damaged, this light fitting must be discarded Iss.2 06072017 www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE...
Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before • Drill holes and fit supplied wall plugs (suitable for installation of a new product. Before removing the masonry only - for other surfaces use appropriate existing fitting, carefully note the position of each set fixings).Fix mounting brackets in place.

7353573536