Download Print this page
Saxby Lighting Reeve 2 Instruction Manual

Saxby Lighting Reeve 2 Instruction Manual

Advertisement

Quick Links

Technical data
Supply
220-240 V~, 50 Hz
Voltage:
Bulb
99816---18W LED module (SMD), 6500K.
Type:
99817---33W LED module (SMD), 6500K.
This product contains a light source of energy efficiency class E.
Non-replaceable light source
Non-replaceable control gear
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
The power supply is double insulated and does not require connection to an earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP65.
65
IP
This product is rated at IK08.
08
IK
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
The LED module is protected by a shade. The shade cannot be replaced, if the shade becomes cracked or damaged, this light
fitting must be discarded
For further information, please visit https://www.lighting-info.co.uk/99816
V1 05/11/2021
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
Instruction manual
Reeve 2
99816, 99817
www.saxbylighting.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Reeve 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Saxby Lighting Reeve 2

  • Page 1 Instruction manual Technical data Supply 220-240 V~, 50 Hz Reeve 2 Voltage: Bulb 99816---18W LED module (SMD), 6500K. Type: 99817---33W LED module (SMD), 6500K. 99816, 99817 This product contains a light source of energy efficiency class E. Non-replaceable light source Non-replaceable control gear Conformity with all relevant UKCA Directive requirements.
  • Page 2 Thank you for purchasing this light fitting. Please read the instruction carefully before use to ensure safe and satisfactory Installation operation of this product. Please retain these instruction for future reference. Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set of wires.

This manual is also suitable for:

9981699817