Closing The Console - ATEN CL5708 User Manual

8 / 16-port vga single rail lcd kvm switch

Hide thumbs Also See for CL5708:

Table of Contents

CL5708 / CL5716 User Manual

Closing the Console

To slide the console module back in, close the cover and do the following:

1. Pull the safety catches on the unit's side rails toward you and push the

module in until it stops.

2. Release the catches; pull the module slightly toward you; then push it all

the way in.

Note: The reason for the two step procedure is to minimize the chances of you

pinching your fingers when sliding the module in.

Table of Contents

Cl5716