Panasonic Urban Multi MX1 Series Manual page 10

Points to Bear in Mind at the System Design
Step 2: Preparation The following sequence should be followed in order to prepare control circuit diagrams in accordance with
of the Control the system list which has already been completed:
1 Diagrams should be prepared for each individual outdoor unit. The outdoor unit model number should
Circuit Diagrams
2 Insert name of refrigerant system. (PAC1, PAC2)
3 Insert name of indoor unit. (CS-32LM→32LM)
4 Insert system name of indoor unit.
5 Insert installation position. (Do this when demarcation is possible)
6 Insert remote controller control wiring. (Group) Indicated by solid line. ........Solid line.
7 Insert centralized control wiring. ........Dotted line
8 Insert Group No. (GNo. for each indoor unit with UNo. 0)
The control circuit diagrams are now complete.
Example: Control circuit diagram
10
be inserted into the diagram. (CU-10MX)
PACD011001G2 / PACD011004G3
Urban Multi Inverter "MX1" Series