Honda UMK450T Manual page 61

62VL510X.book 5 ページ ２０１９年２月８日 金曜日 午後１時１１分
UTNT/UEBT/UEDT types
Install the gear case [1] by aligning the screw/washer
installation hole [2] with the hole [3] in the frame pipe.
Tighten the screw/washer [4] to the specified torque.
TORQUE: 4.2 N·m (0.4 kgf·m, 3.1 lbf·ft)
After tightening the screw/washer, tighten the socket
bolts [5] to the specified torque.
TORQUE: 9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
GRASS DEFLECTOR
REMOVAL/INSTALLATION
2-BLADE TYPE
(U2TT/U2ST/U2NT types)
Remove the two socket bolts [1], protector holder [2]
and grass deflector [3].
Tighten the socket bolts to the specified torque.
TORQUE: 6.9 N·m (0.7 kgf·m, 5.1 lbf·ft)
CUTTER/GEAR CASE
[5]
[4]
[2]
[3]
[1]
[1]
[2]
[3]
13-5