Clutch Inspection - Honda UMK450T Manual

62VL510X.book 6 ページ ２０１９年２月８日 金曜日 午後１時１１分
CLUTCH
Install the recoil starter pulley [1] and hold it with a
driver or equivalent tool [2].
Tighten the nut [3] to the specified torque.
TORQUE: 6.4 N·m (0.65 kgf·m, 4.7 lbf·ft)
Install the following:
– Clutch shoe (page 9-2)
– Recoil starter (page 7-2)

CLUTCH INSPECTION

Measure the thickness at the clutch lining.
STANDARD:
SERVICE LIMIT:
9-6
2.0 mm (0.08 in)
1.0 mm (0.04 in)
[2]
[3]
[1]