Honda UMK425E1 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Trimmer
  5. UMK425E1
  6. Owner's manual

Honda UMK425E1 Owner's Manual

Hide thumbs Also See for UMK425E1:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Enlarged version

FOREWORD

Dear Honda user,
You have bought a Honda brushcutter and we thank you for the
confidence you have shown in us.
The aim of this manual is to help you become familiar with your new
machine so that you can use it safely and keep it properly
maintained.
To bring our customers the latest technological advances, new
equipment and materials and the full benefit of our experience, we
regularly improve the models in our product line. As a result, the
information and characteristics given in this manual are subject to
modification without notice and without any obligation to update the
manual.
The illustrations in this manual show the most suitable model to
represent the topic dealt with.
If you encounter any problem or have any question regarding your
machine, please contact your dealer or an authorized Honda retail
agent.
Keep this manual close at hand for ready reference and, if you sell
your machine, please make sure you supply this manual with it.
We recommend that your read the terms of guarantee so that you
fully understand your rights and responsibilities.
The guarantee is a separate document provided by your dealer.
No part of this publication is to be reproduced without prior written
consent.
SAFETY INSTRUCTIONS
For your own safety and operating comfort, it is highly
recommended that you read this manual in full.
Pay attention to these symbols and their meaning:
Indicates a high risk of severe personal injury or death if
instructions are not followed.
CAUTION:
• Indicates a possibility of personel injury or aquipment damage if
instructions are not followed.
NOTE: Source of usefull information.
HOW TO IDENTIFY YOUR MACHINE
z
UEET
z
LEET
The model of your machine is indicated on its "identification label",
by a series of letters and figures
Write down your machine's serial number here
Write down your machine's model here
2008 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Chataîgniers -
45140 ORMES - FRANCE - All rights reserved
3RVL6601
00X3R-VL6-6010
z
z
z
z
(see page
3).
Printed in France
OWNER'S MANUAL
UMK425E1-UMK435E1
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Identification of machine . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preliminary preparation and checks . . . . . . . . . . . . . . . . . . 5
Starting and stopping the engine . . . . . . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Transport and storage . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Major Honda distributor addresses . . . . . . . . . . . . . . . . . 15
EC-Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . 16
0609
POWER EQUIPMENT
1 EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UMK425E1 and is the answer not in the manual?

Questions and answers

Related Manuals for Honda UMK425E1

Summary of Contents for Honda UMK425E1

  • Page 1: Table Of Contents

    Technical specifications ......13 Major Honda distributor addresses ....15 EC-Declaration of conformity .

  • Page 2: Safety Instructions

    C13. Risk of "kickout" (blade thrust) with all rigid cutting blades. PREPARATION C14. Using any attachments other than those recommended by Honda may cause B1. Do not use this equipment when barefoot or wearing sandals or when wearing damage to your brushcutter, and such damage will not be covered by your loose-fitting clothing that may become snagged on plants.Long trousers, boots or...

  • Page 3: Safety Stickers

    SAFETY STICKERS GENERAL DESCRIPTION Your brushcutter must be used with care. [24] For this reason, adhesive labels in the form of pictograms have been placed on the machine to remind you of the main operating precautions. Their meanings are specified below. These labels are considered to be an integral part of the machine.

  • Page 4: Fitting

    [23] (optional), always replace double harness [22]. the standard protector [10] Put on the harness and fasten it and [9] by the special Honda with the quick fastener [23]. protector [12], available as Adjust the straps with the an accessory.

  • Page 5: Preliminary Preparation And Checks

    [1]. Once the machine is in place, it is essential to check that it is correctly balanced. This check must be performed with the UMK425E1 UMK435E1 cutting attachment fitted on the LEET appliance and with the fuel tank half-full.

  • Page 6: Starting And Stopping The Engine

    Use Honda 4-stroke oil or an equivalent engine oil with high detergent properties, of prime quality and certified as complying with American automobile manufacturer standards for SG and SF classification.

  • Page 7: Operation

    CAUTION: HOT START • When using the machine, always allow the engine to idle between The machine is considered to be "hot" if the engine has been running for more than 5 minutes in the 10 minutes before starting operations. If the machine is allowed to run at maximum speed with no load (no resistance on the cutting attachment) for long The hot start procedure is the same as the cold start procedure periods, the engine may be seriously damaged.

  • Page 8: Maintenance

    C13 D2 D3 SAFETY the direction of rotation. Tools fitted on Honda Sharpening is essential to obtain good results. A slightly blunt brushcutters rotate cutting attachment can be sharpened with a file. counterclockwise. It NEVER A grinding wheel should be used if the wear is more severe.
  • Page 9 NOTE: If the machine vibrates abnormally after sharpening, this indicates that the blade is unbalanced. In this case, contact your authorized dealer Honda to have it checked. CAUTION: • Replace the blade when the wear limit shown in the illustrations...
  • Page 10 1. Remove the bolt [9] from the transmission head. Engine oil SAE 10W30 2. Insert the nozzle of the tube of special lithium grease (available from your Honda dealer) and fill with grease while turning the 0,08 " (80 cc) 0,10 " (100 cc) Oil tank capacity cutting attachment so that the grease is properly distributed.

  • Page 11: Troubleshooting

    Tighten 2. Engine bolts loose. (1) Clean more often in dusty environments. (2) These operations should be performed by an authorized Honda dealer, unless the owner has the appropriate tools and technical know-how required. Refer to the Honda workshop manual.

  • Page 12: Transport And Storage

    STORAGE as options, depending on the model. If the machine is not to be used for more than two months, the UMK425E1 UMK435E1 following storage precautions should be taken: - Drain the fuel tank and run the engine to empty the carburettor.

  • Page 13: Technical Specifications

    TECHNICAL SPECIFICATIONS UMK425E1 MODELS UEET LEET General characteristics Description code HAJF HAHF 1 859 x 671 x 517 1 859 x 384 x 252 Dimensions L x W x h (1 888 x 671 x 504)* (1 888 x 384 x 247)* Empty weight (without cutting attachment) 6.28...
  • Page 14 UMK435E1 MODELS UEET LEET General characteristics Description code HALF HAKF 1 870 x 671 x 521 1 870 x 384 x 258 Dimensions L x W x h (1 899 x 671 x 507)* (1 899 x 384 x 257)* Empty weight (without cutting attachment) 7.53 7.22...

  • Page 15: Major Honda Distributor Addresses

    Major Honda distributor addresses Adresses des principaux concessionnaires Honda Adressen derwichtigsten Honda-Haupthändler Elenco dei maggiori distributori Honda in europa Adressen van Honda-importeurs Direcciones de los principales concesionarios Honda AUSTRIA FRANCE NORWAY SPAIN & LAS PALMAS PROVINCE Honda Motor Europe (North)

  • Page 16: Ec-Declaration Of Conformity

    5) Bevollmächtigter zur Erstellung der technischen Unterlagen: a) Make : Honda 6) Verweis auf harmonisierte Normen: b) Category: Brush cutter 7) Andere herangezogene nationale Normen, Bestimmungen oder Vorschriften: c) Type : UMK425E1 (LEET - UEET), UMK435E1 (LEET - UEET) Ort: Datum: Präsident: Unterschrift: d) Serial number:...
  • Page 17 - b) puterea sonora garantata: - c) parametrii de zgomot Manufacturer: putere instalata neta - d) Procedura de evaluare a conformitatii: - e) organismul notificat Honda France Manufacturing S.A.S 4) Producator: 5) Reprezentantul Autorizat in masura sa intocmeasca documentatia tehnica: Pôle 45 - Rue des Chataîgniers...
  • Page 18 The Power of Dreams...

This manual is also suitable for:

Umk435e1

Table of Contents