Bison TR95 Instruction Manual

————— Instruction Manual —————
M
ODEL
Item Qty
Description
A 1 Adapter Bracket
B 1 Locking Pin
C 1 Rim Removal Bushing
D 2 3/4" External Tooth Lock Washer
E 1 3/4" Jam Nut
F 4 5/16" x 2-1/2" S.F.M.S.
G 4 5/16" Hex Nut
Note: *TR96 Only
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
1 each Hammer
2 each Adjustable Wrenches
Required for TR95, TR96
1. Mount Adjustable Bracket (A) to Backboard with
5/16" x 2-1/2" S.F.M.S. (F), 5/16" Flat Washers (H),
5/16" Lock Washers (O) and 5/16" Hex Nuts (G).
(Figure 1)
2. Slide rim into Adjustable Bracket (A) as far as possible.
Then insert the Locking Pin (B) into the locking
position. (Figure 1 and 2) The Locking Pin should be
above brace as shown. Insert Cotter Pin (L) on other
side of Locking Pin, or use a padlock (not provided).
Figure 2
B
LOCKED POSITION
STORAGE POSITION
Date: 4/10/02 Rev: 6
TR95/96
Removable Rim Bracket
P A R T S L I S T
TOOLS/MATERIALS REQUIRED
RIM REMOVAL BUSHING
SEE INSTR.#3 FOR ASSEMBLY
L
B.A. N.J.C. File: //bisonserver/publisher/instructions/TR95&96
Item Qty Description
H 4 5/16" Flat Washer
I 2 1/4" Roll Pins
J 1 Top Pole
K 1 Bottom Pole
L 1 Cotter Pin
M 1 Rim *
N 1 Net *
O 4 5/16" Lock Washer
1 each Straight Blade Screwdriver
1 each 1/2" Wrench
O
H
Figure 1
1
Customer Service
(800) 247-7668
A
B
F
Ref#: 980049 & 980052