Toyota COROLLA Owner's Manual page 56

54
1-1. For safe use
Run the seat belt through the
3
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Remove the luggage cover. (P. 369)
4
Latch the attaching clip of the
5
upper anchorage strap onto
the anchor fitting. (P. 57)
Run the upper anchorage strap
under the head restraint.
Make sure the seat belt is tightly
secured, and that there is no
slack in the belt.
Install a locking clip near the
6
tab of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip. Buckle the belt again. If
the belt has
release the buckle and rein-
stall the locking clip.
any slack,