Toyota COROLLA Owner's Manual page 54

52
1-1. For safe use
Installing child restraints using a seat belt
Rear-facing  Baby seat (infant seat)/child seat (convertible
■
seat)
Adjust the head restraint to
1
the uppermost position.
Place the child restraint sys-
2
tem on the rear seat facing
the rear of the vehicle.
Run the seat belt through the
3
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Remove the luggage cover. (P. 369)
4
Latch the attaching clip of the
5
upper anchorage strap onto
the anchor fitting. (P. 57)
Run the upper anchorage strap
under the head restraint.
Make sure the seat belt is tightly
secured, and that there is no
slack in the belt.