Advertisement
STEP 4.
Console Support (6) with
Install Upright Cover(R) and (L),(67) and (66) ,on the right and left Uprights (4) and (5) and
Screw Driver (148).
Console Support (6) with
XT485ENT STEP FOUR
Screw Driver (148).
66
66
142
142
142
142
8pcs
of 3.5x16mm Sheet Metal Screws (142) by using Phillips Head
8pcs
of 3.5x16mm Sheet Metal Screws (142) by using Phillips Head
67
67
142
142
142
142
PART
148
142
SHEET METAL SCREWS
148
1. Gather HARDWARE FOR STEP 4.
2. Slide CONSOLE MAST COVER RIGHT
AND LEFT (67, 66) up the uprights. Secure
them with 8 SHEET METAL SCREWS
(142) using the PHILLIPS HEAD
SCREW DRIVER (148).
HARDWARE FOR STEP 4
TYPE
DESCRIPTION
Ø3.5 × 16L
QTY
8
15
Advertisement
