Advertisement
XT485ENT STEP TWO
38
ert Console Assembly (52) into right and left Uprights (4) and (5) and secure with 4 pcs of
55
"x1- 1/2" Button Head Socket Bolts (133) with 4 pcs of Ø10 × 2T Split Washers (113) by using
_Allen Wrench (132).
52
113
133
P 3.
ll Frame Base Covers (L) and (R),(61) and (62), on the Frame Base (2) and secure with 6 pcs
×16mm Tapping Screws (120) by using Phillips Head Screw Driver (148).
48
37
54
113
133
4
5
132
PART
133
113
50
1. Gather HARDWARE FOR STEP 2
2. Connect the SPEED ADJUSTMENT
SWITCH W/ CABLE (54) with the
UPPER SPEED CABLE (37).
3. Connect the INCLINE ADJUSTMENT
SWITCH W/ CABLE (55) with the
UPPER INCLINE CABLE (38).
4. Connect the MIDDLE COMPUTER
CABLE (50) to the UPPER COMPUTER
CABLE (48).
5. Be sure not to pinch any of the cables or
damage may occur to the system.
6. Insert the CONSOLE ASSEMBLY (52)
onto the RIGHT AND LEFT UPRIGHTS
(4, 5) and secure with 4 BUTTON HEAD
SOCKET BOLTS (133) and 4 SPLIT
WASHERS (113). Use the ALLEN
WRENCH (132) to tighten.
HARDWARE FOR STEP 2
TYPE
DESCRIPTION
3/8" X 1-1/2"
BUTTON HEAD SOCKET
BOLTS
SPLIT WASHER
Ø10 × 2.0T
QTY
4
4
13
Advertisement
