Table of Contents
Advertisement
12 Introduction to the manual
Contents of the manual
This manual contains the following chapters:
•
Using the control panel
•
Control locations and operating modes
operating modes of the drive.
•
Program features
control program.
•
Application macros
connection diagram. Macros are pre-defined applications which will save the user
time when configuring the drive.
•
Parameters
describes the parameters used to program the drive.
•
Additional parameter data
•
Fault tracing
lists the warning and fault messages with possible causes and
remedies.
•
Fieldbus control through the embedded fieldbus interface (EFB)
communication to and from a fieldbus network using the embedded fieldbus
interface of the drive.
•
Fieldbus control through a fieldbus adapter
from a fieldbus network using an optional fieldbus adapter module.
•
Control chain diagrams
Related documents
Note: A quick start-up sequence for a speed control application is provided by
ACS860 drives with primary control program, Quick start-up guide
(3AUA0000034053), delivered with the drive.
A list of related manuals is printed on the inside of the front cover.
provides basic instructions for the use of the control panel.
contains descriptions of the features of the ACS860 primary
contains a short description of each macro together with a
contains further information on the parameters.
showing the parameter structure within the drive.
describes the control locations and
describes the communication to and
describes the
Advertisement
Chapters
Table of Contents
