Foreword; Intended Use; Figures - ADE Automatic Operating Manual

1.

FOREWORD

With this manual the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which it is fitted
in order assure maximum efficiency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the explanations contained in the manual.
Before starting up the slicer, you are advised to read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer without delay.
Many accidents are the result of insufficient familiarity with the machine and its safety devices. Before starting
work, read the instructions herein carefully and follow them to the letter.
The Gear Drive Gravity slicers have been designed to comply with the provisions of the European community
safety regulations. Consequently, each slicer is fitted with a plate featuring the "CE" mark attesting to the
products conformity with said provisions.
2.

INTENDED USE

These slicers have been manufactured to slice:
- cooked and raw charcuterie,
- warm and cold meats,
- bread and cheese,
- stoneless fruit and vegetables.
The machine is intended for continuous operation in commercial gastronomic applications. They can slice
thicknesses up to 15mm.
Slicers are not suitable for cutting frozen goods, charcuterie and meat on the bone or fruit with
stones.
Any attempt to slice said products or similar foods may result in serious damage to the
machine and shall cause the warranty to become void.
3.

FIGURES

Fig. 1
Automatic_Automatic-Z-200626-Rev014-UM-en 2