Specification - Honeywell PRO4200 Installation Manual

Installing the PRO4200 Two Reader Module

Specification

Specification
The Two-Reader Module is for use in low voltage, class 2 circuits only.
Primary power
12VDC + 10%
Relay contacts
• Relays 0 through 1 outputs, Form-C, 5A @ 30VDC, resistive
• Relays 2,3,4, and 5 outputs, Form-C,2A @ 30VDC,resistive
:
Inputs
• 8 supervised, End of Line resistors 1k ohm ± 1% tolerance
• 2 unsupervised dedicated inputs
Communication
RS-485
Wire requirements
Power
RS-485
Inputs
Outputs
Readers
Mechanical
Dimension
Weight
Environment
Temperature
Humidity
12
:
,
650mA maximum with 5V readers, 300 mA max. excluding readers
:
:
Range 9,600 to 38,400 bps
:
1 twisted pair, 18AWG
24 AWG, 4,000 feet (1,200 m) max., twisted pair with

shield (120 , 23pF) (Honeywell 3328 or equivalent)
1 twisted pair per input, 30 ohms max.
As required for the load
6 conductors, 18AWG, 500 feet (150m) max. shield and
drain
:
5.5" (140 mm) W x 9" (229 mm) L x 1" (25 mm) H
12 oz. (340 g) nominal
:
0°C to +49°C, operating, -55°C to +85°C, storage
0% to 85% RHNC
(Honeywell 3114 or equivalent
www.honeywell.com