2. Product Specifications
2.4. Profibus-DP cable specification
Connector's structure and connector wire method
Input wire: green wire is connected to A1; red wire is connected to B1.
Output wire: green wire is connected to A2; red wire is connected to B2.
Shield is connected to connector's clamp.
When installing the connector in terminal, connect the cable to A1 and B1.
The following figure displays the connector's structure.
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
Table 6 – Profibus-DP cable specification
Product name : 3077F, 3079A
Product name : Profibus-DP UNITRONIC-BUS L2/FIP/BUS
BC (Bare copper)
Aluminum Foil-Polyester Tape