Suzuki GSX-R600 Manual page 42

2. White LED Brightness
1.Push the SEL button B from white LED lighting mode to change
white LED brightness mode.
2.Push the ADJ button 1 to change brightness in 5 steps. The
brightness indicator changes from "
(max).
3. White LED Preset RPM Setting
1.Push the SEL button B from the white LED brightness mode to
change white LED preset rpm setting. The white LED will light pre-
set setting and tachometer indicates preset rpm.
2.Push the ADJ button 1 to change the preset rpm from 7000 r/min
to 10000 r/min in step 250 r/min and from 10000 r/min to 15250 r/
min in step 50 r/min. When the ADJ button 1 is held in, the preset
rpm will advance continuously.
4. Orange LED Preset RPM Range Setting
1.Push the SEL button B from the white LED preset rpm setting
mode to change orange LED preset rpm range setting.
2.Push the ADJ button 1 to change orange LED preset rpm range
as follows: 250 r/min → 500 r/min → 1000 r/min → 250 r/min
When the White LED is preset at 10000 r/min.
Orange LED preset rpm range A
3.Push the SEL button B to return from adjustment mode to normal
display mode.
The engine rpm indicator system holds the selected setting when the
ignition switch is turned off. The system settings will remain when the
ignition switch is turned on again.
250
500
1000

" (min) to "
Orange LED E
LED1 LED2
9250 9500
8500 9000
7000 8000
3-21

White
LED F
LED3
9750 10000
9500 10000
9000 10000
"