Suzuki GSX-R600 Manual page 103

9. Smear a
around the rubber gasket 7 of
the new oil filter.
10.Screw the new filter by hand
until the filter gasket contacts
the mounting surface (small
resistance will be felt).
NOTICE
Failure to use an oil filter with
the correct design and thread
specifications
your motorcycle's engine.
Be sure to use a genuine
Suzuki oil filter or an equiva-
lent one designed for your
motorcycle.
NOTE: To tighten the oil filter
properly, it is important to accu-
rately identify the position at
which the filter gasket first con-
tacts the mounting surface.
little engine
can damage
Mark top dead center
oil
Tighten the filter 2 turns or
to specified torque.
11.Mark the top dead center posi-
tion on the "cap type" filter
wrench or on the oil filter. Use
an oil filter wrench to tighten
the filter 2 turns or to specified
torque.
Oil filter tightening torque:
20 N·m (2.0 kgf-m, 14.5 lbf-ft)
7-24
Oil filter wrench
In the position at
which the filter
gasket first contacts
the mounting
surface.