Table of Contents
Advertisement
5. Loosen the axle holder bolts
4.
6. Place an accessory service
stand or equivalent under the
swingarm to help stabilize the
rear end.
7. Carefully position a jack under
the exhaust pipe and raise
until the front wheel is slightly
off the ground.
NOTICE
Improper jacking may cause
damage to the fairing or oil fil-
ter.
Do not place the jack under the
lower part of the fairing or the
oil filter when jacking up the
motorcycle.
8. Draw out the axle shaft.
9. Slide the front wheel forward.
10.Put the new wheel in place
and insert the axle shaft.
11.Remove the jack and service
stand.
7-44
Hide quick links:
Advertisement
Chapters
Table of Contents
