Extra Controls - Sprout Nomad Tempo Instruction Manual

04.

Extra Controls

UNISYNC mode
If you are using the UNISYNC feature you can
connect one Nomad Tempo as a primary, then
connect up to 50 UNISYNC devices as replicas.
To connect a replica, short press the UNISYNC button
on your primary device once to enter UNISYNC Mode.
Once the primary announces it is in UNISYNC Mode,
repeat on the replica. After the replica announces
it is in UNISYNC Mode, press the UNISYNC button
once more – the replica should now announce it is
using UNISYNC Audio. The primary speaker will show
a solid blue light while replicas will show a flashing
red and blue light.
Press UNISYNC button again to disable UNISYNC.*
Press and hold the UNISYNC button for five seconds
to reset the UNISYNC function.**
*If UNISYNC is disabled, Nomad Tempo will disconnect
from but remember the replicas connected to it.
**Resetting UNISYNC will enable Nomad Tempo to 'forget'
all replica devices.
08