Sprout Nomad Tempo Instruction Manual page 7

03.
Quick Start Guide
Charging your Nomad Tempo Bluetooth Speaker
1. Connect the Micro-USB into Nomad Tempo input
5V/1A and connect the other end of cable into a
power source*.
2. LED will be solid red, red light will turn off when
fully charged**.
*Power source options include USB connection to
a Sprout AC power adapter, a Sprout car charger or
computer/notebook USB connection.
**Full charge will take about 2.5 to 3 hours.
Bluetooth pairing
1. Press the power button for approximately 3 seconds.
The Nomad Tempo LED will flash blue/red*,
indicating the Nomad Tempo is ready for pairing.
2. Turn on Bluetooth function on your mobile phone/
music device.**
3. 'Nomad Tempo' will appear on your mobile phone/
music Bluetooth list. Select 'Nomad Tempo' to pair.
4. Once your mobile phone/music device is
connected to Nomad Tempo, you will hear
'Bluetooth connected'.
*If LED is not flashing blue/red, long press power button
for 3 seconds.
**If you are not familiar with Bluetooth pairing for your
mobile phone or music device, refer to the user guide for
your mobile phone/music device for instructions to pair a
new device by using Bluetooth.
07