Setting The Alarm; Switching The Alarm On / Off - Auriol HG03034A Operation And Safety Notes

˜ Setting the alarm
Press the MODE button 6 twice to enter the
alarm mode. The hour field of the alarm time
flashes in the display.
Press the START button 2 to set the desired
hour value.
Press the RESET button 4 to confirm your set-
ting. The minute field flashes in the display.
Press the START button 2 to set the desired
minute value.
Press the RESET button 4 to confirm your
setting.
Press the MODE button 6 to enter the time
mode.
˜ Switching the alarm on / off
Switch the alarm on by pressing and keeping
pressed the START button 2 and the RESET
button 4 while in time mode. If the alarm is
switched on, the alarm symbol 7 appears in
the display.
When the alarm sounds, you can activate
the Snooze function by pressing the START
button 2 . The alarm sounds again after 4 to
5 minutes. The alarm will keep on sounding as
many times as you press the START button 2 .
Press the RESET button 4 to stop the alarm.
The alarm will keep on sounding for approx.
1 minute if you don't press any button.
Press the RESET button 4 when the watch is in
time mode to display the alarm time.
GB/IE 27