Write
Editing names
1.
On the Write page, select the Name.
2.
Press ENTER, or turn the
The Name page appears.
3.
Use the cursor buttons to move back and forth in the text, and use
shown below.
Names can be up to 24 characters long.
4.
Press
SHIFT
to toggle between A-Z, a-z, numbers, and symbols.
5.
Hold
SHIFT
and press
6.
Hold
SHIFT
and press
7.
When you've finished entering text, press
Write Metadata
This shows the Categories for the item shown on the Write page.
Note: When Type is set to Set List Slot, this page is not available.
Category 1/2
[List of Categories]
Each object type—Performances, Programs, etc.—has its own list of Categories. You can create new Categories using
the Editor Librarian software, if desired. Note that only the first 15 Categories are mapped to the front-panel buttons.
Compare
Select
[Saved Performance, Edited Performance]
Saved Performance: The saved version of the Performance will be heard.
Edited Performance: The edited version of the Performance will be heard. If the Performance has not been edited, this
is not available.
VALUE
dial.
>
(PAGE+) to insert a space.
<
(PAGE-) to delete the previous character.
ENTER
VALUE
to return to the previous page, or
15
to select a character from the set
SHIFT-ENTER
to cancel.