Table of Contents
Advertisement
Selecting and Playing Sounds
If you select a sound using the display, buttons
again.
You can store many different Set Lists, and switch between them as desired. To select a different Set List:
1.
Press UTILITY twice, to go to the System Setup page.
2.
Select the Set List parameter, and press
From this point, selecting Set Lists works just like selecting Performances, as described above.
Assigning a Performance to a Set List Slot
1.
Select the Performance that you'd like to assign.
2.
Press the
SET LIST
3.
Hold
WRITE
and press the Slot to which you'd like to save.
The Write page appears, with that Slot already selected. To change the Slot, hold
button.
4.
Press WRITE, and then
The Set List will also be saved. If the Performance has been edited, you'll be prompted to save it too.
Assigning to a Slot in a different bank
While you're on the Write page, you can also select a Slot from a different bank (for instance, if you're copying a
Performance to a different Slot):
1.
Hold
WRITE
and
SHIFT
2.
Release
WRITE
and SHIFT.
3.
Proceed to Step 3 above.
1-16
ENTER
button, so that it is lit.
ENTER
to confirm.
(or, if you prefer,
WRITE
will go dark. To return to the Set List, just press one of the buttons
or turn the
VALUE
knob.
and
SET LIST),
and press button
6
WRITE
and press a different Slot
1-4
for the desired Bank.
Advertisement
Table of Contents
