Page 1
QUICK START GUIDE MODE ONLY FLIR MODEL DM284 THERMAL IMAGING IGM MODE QUICK GUIDE...
Page 2
QUICK START GUIDE – MODE ONLY USER MANUAL LOCATION: The detailed User Manual is located on the support.flir.com web site (download tab). Translations of User Manuals and Quick Starts are also available at the web site. The Quick Start Guide for the Multimeter functions is a separate booklet located in the product packaging.
Page 3
The Distance-to-Spot (D:S) ratio for the imager is 30:1 meaning that the measurement spot is always 30 times smaller than the meter-to-spot distance (see D:S ratio diagram below). The thermal imager’s Field of View (FOV) is 50 (see top view) by 38.6 (see side view). FLIR DM284 – IGM QUICK START GUIDE Document Identifier: DM284-QS_IGM-en-US_AC...
Page 4
Laser pointer: Press OK at this icon to switch the laser pointer ON (blue dot next to icon) or OFF. Cross hairs: Press OK at this icon to switch the cross hairs ON or OFF. FLIR DM284 – IGM QUICK START GUIDE Document Identifier: DM284-QS_IGM-en-US_AC...
Page 5
F (2 row). For Type-K measurement instructions refer to the Multimeter ‘Getting Started’ guide or the complete DM284 User Manual available at the support.flir.com web site. Tip: To find the emissivity of any target spot, measure the spot with the Type-K probe and the thermal imager and then adjust the emissivity until the differential temperature is zero.
Page 6
+1 855-499-3662 option 3 (toll free) Certificate of Conformity and ISO-9001 Quality Management System FLIR Commercial Systems, Inc., an ISO 9001 certified company, hereby certify that our instruments meet or exceed the specifications stated in the user manuals. This instrument was produced under the stringent guidelines of FLIR Commercial System’s certified ISO 9001 Quality Management System from design to delivery.
Need help?
Do you have a question about the DM284 and is the answer not in the manual?
Questions and answers