Procedure For Tilting Down - Yamaha VF150 Owner's Manual

Operation
more detailed information, see page
74.
[ECM01642]
1
1. Tilt support lever
4. Once the outboard motor is supported
with the tilt support lever, push the "
(down) side of the power trim and tilt
switch to retract the trim rods. NOTICE:
Make sure that the trim rods retracts
completely during mooring. This pro-
tects the rods from marine growth and
corrosion, which could damage the
power trim and tilt mechanism.
70
1
1. Trim rod
EMU46200

Procedure for tilting down

Tilting down when using the tilt support shaft
1. If using the tilt support shaft, fully tilt the
outboard motor up, and then remove the
tilt support shaft.
ZMU07744
"
1. Tilt support shaft
2. Push the "
trim and tilt switch to tilt the outboard
motor down.
[ECM00253]
DN
1. Power trim and tilt switch
ZMU07764
1
ZMU08019
" (down) side of the power
1
ZMU07771