Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha F60C Owner's Manual

Hide thumbs Also See for F60C:
Table of Contents

Advertisement

3.
Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and
tilt unit or in the power tilt unit loses
pressure.
[EWM00262]
the tilt support lever or knob when
trailering the boat. The outboard mo-
tor could shake loose from the tilt
support and fall. If the motor cannot
be trailered in the normal running po-
sition, use an additional support de-
vice to secure it in the tilt position.
For more detailed information, see
page 62.
[ECM01641]
4.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods. NOTICE: Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
NOTICE: Do not use
ZMU03640
" (down) to retract the
EMU33121
Procedure for tilting down (power
trim and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
UP
DN
DN
DN
Operation
"
ZMU03644
"
ZMU01936
ZMU03645
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

F50fFt60d

Table of Contents